Each Rodger system contains two pair of unisex briefs, one transmitter and one alarm receiver. The small waterproof transmitter snaps to the waistband and is powered by a small battery. Once the underpants get wet, the transmitter sends a wireless signal to the alarm receiver. The alarm receiver sounds, indicating that the child is wetting. The alarm receiver plugs into a convenient wall outlet in your child's bedroom or by using two AA batteries. The alarm receiver has a variable volume control to permit you to adjust the volume to your desired level.

Once the alarm receiver sounds, it will sound continuously until you press a reset button on the front of the receiver to turn the alarm off. This helps insure that your child gets up to the alarm - NOT turn the alarm off in bed and fall back asleep.

Just Arrived! Need a receiver for the parent too? Now you can order a two receiver package that allows you to place one receiver in your child's bedroom and a second receiver in another bedroom. When your child wets, your receiver will sound too, alerting you so you can help your child.

Receivers work up to approximately 50 feet - depending on wall / floor construction, etc. The two receivers and one transmitter are matched sets so you must purchase all together. You cannot add a second receiver at a later time.

We recommend testing your alarm prior to use, to make sure both units work with the layout of your home.

Sizing Chart: Rodger brief sizes below are roughly equivalent to the Hanes size indicated. Shrinkage is minimal. If your child is between sizes or near the higher recommended weight for that size, select the next larger size. When you receive the briefs, try them on first to make sure they fit. Used briefs are not returnable.

This new wireless alarm is the first of its kind. A Bedwetting Store Exclusive! The unique moisture-sensing briefs quickly detect when your child begins to wet and sends a wireless signal to sound the alarm receiver. Simple to use, you simply snap the small, 1 ounce transmitter to the briefs before bed. Great for children who are reluctant to thread a sensor cord under their shirt or for those who don't wear a pajama or t-shirt top.

Because starch is used on the briefs during the manufacturing process, it is recommended that the briefs be laundered or soaked with water and detergent prior to the first use. This removes the starch from the cloth, increasing the rate of absorption, and insures the alarm’s quick response to moisture.

Two briefs are included with each package. Most parents will find additional sensor briefs useful if you don't do the laundry frequently. Additional underwear available in our accessories area This alarm does NOT require your child to wear a feminine pad like most other wireless units. The use of other wireless electronics in your home or neighborhood may affect the performance of your unit. You may need to turn these devices off at night. Each transmitter/receiver is a matched set so you may use multiple units in your household if you have more than one child who needs to use the alarm.

Because of our customer's feedback, we are pleased to offer an alarm package that includes two receivers - one for the child's room and one for the parent's room. This enables parents to hear the alarm at the same time their child does, to ensure their child's proper response.

Product Details