Profile Information

Login Datas

or Login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

DRI Eclipse Wireless Bed wetting Alarm

DRI Eclipse Wireless Bed wetting Alarm
Wireless enuresis alarm that works in a pull-up

Availability: Item usually ships within 24 hours.

  • Small wireless Urosensor designed to be used with pull up or small pad
  • Loud sound comes from 3" receiver; can be placed anywhere in room
  • Sensor has sealed battery that never needs replacement
  • Best alarm for use with pull up
  • Comes with unlimited access to all Bedwetting Store resources and support from our team. Learn More

Our Customers Say it Best!

    • 5
    • Amazing!

    • By DebbieR from Lehi, UT

    • I purchased this alarm based on a recommendation from my 6 year old daughters pediatrician. She has never been able to stay dry for more than a night, but has no issues during the day. We began using the alarm about 4 weeks ago. It took 6 straight nights of the alarm going off 1-2 times a night before we had an entire dry night! For the next 4-5 days (in the second week) I think the alarm went off 2 different nights. And ever since then, she has stayed dry! Being able to ditch the pull-ups at night has been a huge confidence booster for her. She is so proud of herself! This alarm is definitely VERY sensitive. If my daughter had bathed right before putting on the pull up with the alarm, it always went off, even if she tried to dry completely off. We just learned to give a little time between bathing and putting on the pull-up for the night so she was totally dried off. The alarm was easy for her to turn on and off herself. It was loud enough to wake her up, but didn't scare her. I would definitely recommend this alarm! She was completely dry every night, in under 2 weeks!
    • Bottom Line: Yes, I would recommend this to a friend



The DRI Eclipse wireless bed wetting alarm system is an easy-to-use alarm that works without wires. A small battery operated Urosensor is worn by your child to bed. When your child wets, the sensor detects the urine and transmits a signal to a small receiver that emits a loud chirping noise to alert you and your child. The Urosensor (urine detector) can be used with a mini pad, pull-up or sandwiched between two pairs of underwear. Simply cut a slit in the mini pad or pull-up and slide the Urosensor in place.

The bedwetting alarm's receiver is placed on a table or night stand so your child must get up and get out of bed to switch the sound off. The alarm emits a loud chirping sound from the receiver. The volume can be adjusted from inside the battery compartment. An on/off switch on the side of the receiver allows you to control the unit.

The wireless Urosensor should not need replacing because it has no moving parts and is fully sealed, eliminating the risk of urine getting inside. The internal battery will last two to three years. However, it may be damaged if it is put through the washer and dryer (the static electricity of the dryer can cause damage) so make sure it has been removed from the underwear before washing.

Bedwetting Store CommentsComments

Dry Matters App

The DRI Eclipse Urosensor is suitable to use in a pull-up or minipad. Simply cut a 1 inch slit on the inside of pad or the pull-up in the crotch area. Insert the point of the scissors into the slit, and moving the scissors from side to side, make a small tunnel into which you can insert the detector. To make sure that the Urosensor stays in place, it can be useful to tape across the slit once you have put the detector inside. The covering layer of some pullups and minipads are designed to keep the user dry, and if the Urosensor is placed just under that layer, it may not trigger. It is best to insert the Urosensor under the layers of the absorbent material so that they will become wet and press onto the Urosensor.

Alternative placement is to use underwear with double fabric in the front fly area. Cut a slit in the outside layer toward the crotch and insert the Urosensor inside with the black sensing strip facing the user. Note: Wrapping the Urosensor in a tissue before insertion can help the wetting to be detected more quickly. Another option is to wear two pairs of close fitting underwear and put the Urosensor, wrapped in a tissue or not wrapped, between the two pairs. (More extensive placement instructions)

You may also be interested in the following product(s)

  • Malem Ultimate Bedwetting Alarm

    Malem Ultimate Bedwetting Alarm


    Be the first to review this product

  • Rodger Wireless Bedwetting Alarm System

    Rodger Wireless Bedwetting Alarm System


    Be the first to review this product