The Rodger Wireless Bedwetting Alarm System is a complete, easy-to-use dry solution to your child’s bedwetting problem. Your child will find it easy to wear because the underwear fits just like normal underwear. But with a very special difference – the invisible threads sewn into the underpants connect to two snaps near the waistband. At bedtime, your child attaches a small transmitter to the snaps on the underpants. When your child wets a few drops, the Rodger alarm receiver sounds with one of 8 different tones, alerting you and your child that wetting has occurred.
Each Rodger Bedwetting Alarm system contains two unisex briefs (in your choice of either blue or white), one transmitter, and one 8 tone variable volume alarm receiver. The small waterproof transmitter snaps to the waistband, and is powered by one A23 size battery. The alarm receiver plugs into a convenient wall outlet in your child's bedroom, OR it can take two AA batteries - the alarm will not work if it is plugged and using batteries at the same time.
Once the bed wetting alarm sounds, it will continue until you press a reset button on the front of the receiver. This helps ensure that your child actually gets up when the alarm sounds. The child can then go to the bathroom, and parents can check on their progress. After toileting, replace the underwear with a clean pair and reattach the transmitter.
Need a receiver for the parent too? Order a two receiver package that allows you to place one receiver in your child's bedroom and a second receiver in another bedroom. When your child wets, your receiver will sound too, alerting you so you can help your child. As children have less enuresis and need less parental assistance, the second receiver can be turned off.
Receivers work up to approximately 75 feet - depending on wall and floor construction and surrounding environment. We recommend testing your alarm prior to use, to make sure both units work within the layout of your home. Replacement transmitters can be purchased (call us for details). Many parents find that extra sensor briefs are useful and are available here.
Sizing Chart: We strongly recommend measuring your child's waist to accurately size him or her. Shrinkage will occur. Try the briefs on to make sure they fit. Used/washed briefs are not returnable. If you have any questions, call us at 1-800-214-9605.
| Rodger Size | Waist (in inches) | Manufacturers Reference |
| XS | 21-22" | 116 |
| S | 22-23" | 128 |
| M | 23-26" | 140 |
| L | 26-27" | 152 |
| XL | 27-28" | 164 |
| Adult S | 27-30" | 176 |
| Adult M | 32-34" | 188 |
| Adult L | 34-36" | 200 |
| Adult XL | 36-38" | 212 |
Comments from the 
This wireless bed wetting alarm is the first of its kind. A Bedwetting Store Exclusive! The unique moisture-sensing briefs quickly detect wetness from any angle. Great for children who are reluctant to thread a sensor cord under their shirt, or for those who don't wear a pajama or t-shirt top. Underwear available in 2 unisex colors - white and blue. Design is identical.
Because starch is used on the briefs during the manufacturing process, it is recommended that the briefs be laundered or soaked with water and detergent prior to the first use. This removes the starch from the cloth, increasing the rate of absorption, and ensures the alarm’s quick response.
A second receiver is especially important for larger homes or if your child sleeps on a different floor. You will be alerted simultaneously with your child, and can quickly provide the assistance they need.
Video: Rodger Wireless Bedwetting Alarm System
The Rodger Wireless Bedwetting Alarm System is a complete, easy-to-use dry solution to your child’s bedwetting problem. Your child will find it easy to wear because the underwear fits just like normal underwear. But with a very special difference – the invisible threads sewn into the underpants connect to two snaps near the waistband. At bedtime, your child attaches a small transmitter to the snaps on the underpants. When your child wets a few drops, the Rodger alarm receiver sounds with one of 8 different tones, alerting you and your child that wetting has occurred. Each Rodger Bedwetting Alarm system contains two unisex briefs (in your choice of either blue or white), one transmitter, and one 8 tone variable volume alarm receiver. The small waterproof transmitter snaps to the waistband, and is powered by one A23 size battery. The alarm receiver plugs into a convenient wall outlet in your child's bedroom, OR it can take two AA batteries - the alarm will not work if it is plugged and using batteries at the same time. Once the bed wetting alarm sounds, it will continue until you press a reset button on the front of the receiver. This helps ensure that your child actually gets up when the alarm sounds. The child can then go to the bathroom, and parents can check on their progress. After toileting, replace the underwear with a clean pair and reattach the transmitter. Need a receiver for the parent too? Order a two receiver package that allows you to place one receiver in your child's bedroom and a second receiver in another bedroom. When your child wets, your receiver will sound too, alerting you so you can help your child. As children have less enuresis and need less parental assistance, the second receiver can be turned off. Receivers work up to approximately 75 feet - depending on wall and floor construction and surrounding environment. We recommend testing your alarm prior to use, to make sure both units work within the layout of your home. Replacement transmitters can be purchased (call us for details).| Manufacturer | Rodger |
| Alarm Type | Sound with variable volume control (optional bed shaker available) |
| Warranty | Briefs – 6 months 8 Tone Receiver – 1 year 8 Tone Dual – 1 year |
| Sensor Type | Sewn into briefs |
| Battery | Transmitter: CR2032 Lithium Watch Battery, Receiver: 2 x AAA alkaline |
| Color |
|
| Alarm Transmitter Dimensions | Circular - 1 5/8" diameter, 1/2" depth, 1 ounce with battery |
| Alarm Receiver Dimensions | Circular - 3 7/8" diameter, 1 5/8" depth, 6 ounces with batteries |
| Power Source | 110–120V Wall Outlet or Battery (AC input is 120v only) |
| Range | The maximum range of the system is approximately 75 feet. The actual range depends on wireless interference, wall materials, etc. |
| Shipping Weight | 2 lbs. (View shipping rates and policies) |
| Other | Pair each tansmitter and receiver when you get them. Because each alarm uses its own frequency, multiple units can be used for several children in one household. More than one receiver can be paired with one transmitter. If the transmitter is broken or lost, a new transmitter can be paired to an existing receiver. |
| Instruction Manual | Rodger Wireless Instructions |
| Progress Chart | Rodger Progress Chart |
| Troubleshooting Guide | Rodger Troubleshooting/FAQs |
| Care Instructions | Remove transmitter from briefs. Machine wash briefs in warm water. Do not use fabric softener. Tumble dry on low heat or air dry. DO NOT WRING. DO NOT WASH TRANSMITTER. Wipe transmitter clean with damp cloth and air dry. Because starch is used on the briefs during the manufacturing process, it is recommended that the briefs be laundered or soaked with water and detergent prior to the first use. This removes the starch from the cloth, increasing the rate of absorption, and insures the alarm's quick response to moisture. |
Questions on Rodger Wireless Bedwetting Alarm System
- From Pam at 1/28/13
- I just replaced the battery in the transmitter and now it doesn’t work at all. What could be the problem?
- You should check that you have replaced the battery correctly. The CR2032 battery should be inserted so the shiny side with the + is facing up. The short metal prong should be propped up next to the battery and the longer metal prong placed under the battery. Having the small metal prongs in the wrong place can cause the alarm to malfunction.
- From Daniel at 12/15/12
- How do I turn the volume up or down?
- Plug the circular receiver into the wall. Push the button in the middle so the green light shows. Press the + sign repeatedly to increase the volume. To decrease the volume, lightly press the – sign. When changing from + and -, the green button must be pushed each time. If the alarm stops sounding when adjusting the volume, simply re-push the green button and continue the adjustment. Once the volume is changed, the next time the alarm sounds; it will be at that level. (The volume cannot be changed while the alarm is sounding in response to wetness or when the transmitter is on the testing strip).
- From Meghan at 10/3/10
- What type of underwear should my child wear?
- The Rodger Wireless alarm comes with two pairs of sensor briefs that must be worn in order for the alarm to sense moisture. Regular underwear/briefs are not required.
- From Sophia at 2/2/11
- Can I purchase additional briefs with my Rodger Alarm?
- Yes, additional briefs can be purchased for $19.95 each. Some parents prefer to have an extra pair or two to reduce the frequency of laundry loads.
- From Vance at 3/14/11
- Can I use the Rodger Wireless alarm with pull-ups or Good Night products?
- Using a pull-up or other disposable pant product is not recommended when wearing the Rodger alarm. The use of a pull-up increases the chances that the Transmitter unit worn on the underwear will be flooded with urine, which may cause it to malfunction. Secondly, it is very difficult to monitor progress, especially as your child reduces the amount he wets, when a pull-up is worn over the briefs.
- From Kathryn at 5/22/11
- All of the outlets in my child's bedroom are covered by furniture and are difficult to access. How can I plug my Receiver in?
- Many parents find that using a short power strip or extension cord makes the Receiver more accessible for turning on and off/resetting, etc. Batteries can also be used to power the receiver. Do not plug the receiver in the wall outlet if you are using batteries.
- From Heather at 7/1/11
- How do I improve the chances that my child will awaken when the alarm sounds?
- Make sure that the volume on the Receiver is turned up to a high volume and that there are no objects or materials blocking the outlet it is plugged into. Most children are very sound sleepers, and will initially require the assistance of a parent/caregiver to wake up to the alarm. It is important that an adult can hear the alarm so that he/she can assist the child in waking up. Rodger Wireless alarms are available with 2 receivers, one for the child and one for the parents.
- From John at 10/5/11
- I accidentally put my Transmitter in the washing machine. Can I buy just that piece?
- Yes, this new model of Rodger bedwetting alarms allows you to pair a new transmitter with your still operating receiver (must be this newer model). Please call us for details at 800.214.9605, and we will help you get a replacement transmitter.
- From Susan at 1/5/12
- Does the Rodger Wireless alarm play more than one sound?
- Yes, the Rodger alarm offers the selection of 8 different sounds.
- From Eric at 11/16/12
- I have the rectangular model of Rodger wireless alarm. I washed the transmitter and now it doesn't work. Can I buy a new rectangular/square transmitter to work with this system? Will the circular replacement transmitter work with my model?
- The previous rectangular model of Rodger wireless alarm requires that you buy a new paired system, both the transmitter and receiver, even if only the transmitter is broken. Please call us (800-214-9605) and we can help you get a replacement system at a discounted price.
- From Winston at 1/8/13
- The alarm receiver isn't sounding even though it has batteries in it and it's plugged it. What's the problem?
- The Rodger Wireless alarm can be used with batteries OR while plugged in, but not both at the same time.
Ask Your Own Question
Rodger Wireless Bedwetting Alarm System
- Sensor style: Unique moisture sensing briefs
- Alert type: Sound (8 tones with volume control) or additional vibrating attachment
- Available colors: Briefs available in white or blue
- Includes: One transmitter, 2 unisex briefs, and your choice of one or two receivers
- Details: Compact and lightweight wireless transmitter works up to 75 feet
- Additional briefs can be purchased separately (View Extra Briefs)
- Available with vibrating option
Ready to Buy?
$6.95 Flat Rate Shipping *Options Available
Item: RA
In Stock, usually ships in 24 hours.
Price: $129.95 - $169.95
Our customers say it best.
-
Sleepless night saver!!
- Comments about Rodger Wireless Bedwetting Alarm System:
My daughter has struggled with wet nights (and even some dribbling during the day) so after nighttime pull-ups failed us because of their discomfort, we decided to spend the money on the alarm. What a lifesaver! My daughter has started to get her confidence back. No more leaks during the day and only an occassional alarm at night after 3 months. Highly recommend....
- bottom line: Yes, I would recommend this to a friend.
