Wet Call Bed-side Bedwetting Alarm with Pad

  • Firm plastic sensor pad lies on bed
  • Pad fits in included mesh case
  • Mesh case increases comfort and decreases false alarms due to sweating
  • Alarm unit connected to pad and attached to bed sheet or bed rail
  • Simple to use
  • Comes with unlimited access to all Bedwetting Store resources and support from our team

This Wet Call moisture sensing bed pad/alarm has been redesigned to be even more reliable. Specially made for children who do not want to wear an alarm, or for older incontinent patients, this alarm is simple to use. The Wet Call bed pad is placed in the mesh case, which goes under the child. The alarm is connected via a 5 foot cord to the 18 inch by 24 inch bed pad and is made to handle the deepest sleepers while having the proper sensitivity to detect the first drop of urine.

The sensor pads are made of vinyl with a soft foam backing for comfort. The sensor pads can instantly be wiped clean and ready to be reused in seconds. Best of all, no acid from urine can be trapped anywhere, giving the pads an accurate and long life.

The alarm buzzer unit can either be attached to the sheet or attached to the bed rail using the included Velcro strip. The alarm sounds when it senses wetness and is turned off by simply unplugging the cord from the alarm unit. The alarm has dual volume control and can be set to either high or low volume.


The addition of the mesh case to place the sensor pad in helps to make lying on the pad more comfortable. It also absorbs sweat which can occur when lying directly on the plastic pad. This case eliminates the false alarms that occur with sweating. Two mesh cases are included with each alarm so you can replace it when it becomes wet during the night. Machine wash and dry the case, wipe the plastic pad to dry.

Note: This alarm unit should not be attached to the child but should be attached to the bed. Attempting to attach unit to child can cause it to become disconnected as child rolls over.

Manufacturer HTA Direct Sourcing
Alarm Type Sound – 2 set volumes
Alarm Warranty 1 year
Sensor Type Bed mat sensor
Battery 1 x 9 volt alkaline
Color White
Alarm Dimensions Alarm box – 2" x 2.5" x 0.75"
Sensor Dimensions Connecting cord – approximately 5' long. Bed mat 18" x 24"
Shipping Weight (View shipping rates and policies)
Instruction Manual Wet Call Instructions
Care Instructions Wipe plastic pad dry after use. Machine wash and dry mesh case. No fabric softener.
ALARM TYPE Bell and Pad

Wipe dry after use.

  • Made in the USA
  • Alarm Type: Sound - 2 set volumes
  • Warranty: 60 days
  • Sensor: Bed mat sensor included
  • Battery: 1 x 9 volt alkaline
  • Color: White
  • Alarm Dimensions: Alarm box - 2 x 2.5 x 0.75 inches deep.
  • Sensor Dimensions: Connecting cord - approximately 5 feet long. Bed mat 19 x 24 inches
  • Shipping Weight: 3 pounds