Why choose a treatment kit? Kits comes with everything you need to get started. Alarm of your choosing, underpads for quick changes, and a book to guide you. Plus, save over $28 over buying items individually.
Is your child struggling during the day? Try setting a vibrating watch to remind them to use the restroom and use washable briefs for daytime accidents.
Protect your bed with a wide variety of mattress covers or underpads. Clean your bed with our tried and tested stain removers.
Products for both adults and children, we carry disposable diapers and briefs plus underpads to protect your furniture and beds.
Need something extra for your alarm? Perhaps you want a book to help motivate your child or help to guide you, the parent, on how to help your child achieve dryness.
First, attach the outlet plug on the back of the receiver, then plug it into an outlet. Next, pair the transmitter and receiver by pressing the central LED button on the receiver, which will light up green. Then press the – and + buttons simultaneously for 3 seconds. The central button will start blinking green and you have one minute to connect the two snaps of the transmitter with the metal strip on the front of the receiver. They are paired when the LED lights up green and the receiver gives a short beep.
Extra receivers are paired to the transmitter in the same way.
Have your child put on the sensor briefs and snap the transmitter onto the studs at the waistband.
First, take a cup of LUKEWARM water, and mix in a teaspoon of salt. Clip the transmitter onto the sensor brief and plug the Receiver unit into an outlet and turn it on. Pour a small amount of the saltwater mixture onto the front of the briefs (approximately 2 teaspoons). This should cause the alarm to sound. **Briefs become more absorbent after washing, so testing before washing for the first time may require more saltwater.
The Rodger Wireless alarm comes with two pairs of sensor briefs that must be worn in order for the alarm to sense moisture. Regular underwear/briefs are not required.
Please view the size conversion chart on our website for sizing information.
Yes, additional briefs can be purchased for $19.95 each. Some parents prefer to have an extra pair or two to reduce the frequency of laundry loads.
Using a pull-up or other disposable pant product is not recommended when wearing the Rodger alarm. The use of a pull-up increases the chances that the Transmitter unit worn on the underwear will be flooded with urine, which may cause it to malfunction. Secondly, it is very difficult to monitor progress, especially as your child reduces the amount he wets, when a pull-up is worn over the briefs.
First, turn on the Receiver (wall unit) and plug it into an outlet. The green light should shine constantly. Then, holding the Transmitter box, place a metal object (such as a kitchen knife) across the two snaps on the back of the transmitter box and hold until the Receiver unit begins to sound (approximately 1-2 seconds). The Receiver sounding indicates that the alarm is working properly. Press the reset button on the Receiver to turn the sound off.
Many parents find that using a short power strip or extension cord makes the Receiver much more accessible for turning on and off/resetting, etc. You can also use batteries in the receiver rather than plugging it in. Do not use batteries and wall outlet at same time- use one or the other.
Make sure that the volume on the Receiver is turned up to a high volume and that there are no objects or materials blocking the outlet it is plugged into. In addition, it is important to note that most children are very sound sleepers, and will require the assistance of a parent/caregiver to wake up to the alarm. Therefore, it is important that an adult can hear the alarm so that he/she can assist the child in waking up.
The Rodger Wireless alarm will continue to sound until you or your child presses the Reset button on the Receiver wall unit. This requires your child to get up and out of bed to turn the alarm off, rather than simply pushing a button on the shoulder and falling back to sleep.
After the alarm is triggered by moisture, turn the sound off by pressing the reset button on the Receiver (wall unit). This will require your child to get out of bed.
As of 2014, the Rodger wireless transmitter contains a sealed battery that does not need to be replace. If your alarm was purchased before 2013, the Rodger Wireless alarm uses one CR2032 Lithium Watch Battery in the transmitter and 2 AAA alkaline batteries for the receiver, if not using the wall outlet. When replacing the CR2032 battery, make sure the short metal prong is propped up next to the battery and the longer metal prong is placed under the battery. (If receiver fails to sound after replacing battery, confirm that the new battery is put back in correctly.)
Battery drain is minimal in the Transmitter unit, as it only transmits when moisture is detected. This battery, therefore, should last for the life of the alarm. If you choose to use batteries in the Receiver rather than using outlet power, these batteries will last for approximately one month. This may vary significantly depending upon the amount of time that the Receiver is actually switched ON. If you use batteries, do not leave the Receiver on during the day as this will quickly drain the batteries. We recommend plugging the Receiver into a wall outlet rather than using batteries, as this will cut down on costs and maintenance.
Replacement AAA batteries can be found locally at any grocery store or other store that carries common batteries. The 2014 models do not require battery changing in the transmitter. For older models, replacement CR2032 batteries should also be available locally at any store that carries batteries for watches. Replacements can also be purchased directly from the Bedwetting Store if you have trouble finding them elsewhere.
For 2014 or newer models, the transmitter battery never needs to be replaced. If using batteries in the Receiver unit, simply pull the battery cover off the back of the unit, and insert two new batteries, making sure to follow the polarity indicated on the battery cover. To replace the battery in the 2013 or older Transmitter, use a small screwdriver to unscrew the battery cover and pull it off. Replace the flat battery with the + side up and with the short metal prong propped up next to the battery and the longer metal prong placed under the battery.
You may be getting wireless interference from another wireless device. Try turning off your wireless internet, cordless phone or other devices one by one and see if you can identify the source of interference. Occasionally these devices may cause false alarms with your Rodger system. You may need to temporarily turn off your wireless internet, or source during the night in these instances. Trying a different outlet in the room may even change the amount of wireless interference. During the day, turn off the receiver unit that is plugged into the wall.
Remember that wireless interference in your own home is not a defect in the alarm, but something that you may need to accommodate for the few weeks that your child will need to use the alarm. Try re-pairing the alarm as this may also decrease interference.
If your Receiver unit does not sound when you place a metal object across the Transmitter connections, this may indicate a dead battery in the Transmitter Unit. Try using another metal object such as a screwdriver to test the unit. If the Receiver unit does not sound, try replacing the Transmitter battery and repeat the test.
There are several things that may have caused the alarm not to sound:
While the Transmitter unit will sustain moisture from general wetting, it should be kept as dry as possible, and is not designed to sustain major flooding damage. Therefore, REMEMBER TO REMOVE THE TRANSMITTER FROM YOUR CHILD’S UNDERWEAR BEFORE LAUNDERING.
The Rodger briefs can be machine washed and dried on a low setting. DO NOT wring the briefs, as this will damage the sensing mechanism. To clean the Transmitter unit, simply wipe with a damp cloth and let air dry. DO NOT PUT THE TRANSMITTER UNIT IN THE WASHING MACHINE.
Yes, a new transmitter can be purchased for the newer circular Rodger alarm and paired with your receiver.
Often, this just indicates that the Receiver was turned off after the initial activation and was not turned back on before using the alarm again. Make sure you push the center button so the green LED light shines. If the light is yellow, it means a low battery so it should be replaced. You should also try repairing the transmitter and receiver.
Yes, the alarm makes 8 different sounds. Select the sound of your choice by pressing the SELECT-button. The last selected sound will be heard every time the alarm goes off. For each alarm to be a different sound, Press the AUTO-button. Each time the alarm goes off, 1 of the 8 available sounds will be heard.
Many children who wet the bed are such sound sleepers that they cannot initially respond to an alarm on their own. This does not mean that they will be unsuccessful with the alarm. It is important that if your child does not hear the alarm on her own, that you help her wake up when the alarm goes off.
The Rodger Wireless alarm is covered by a manufacturer’s warranty for 1 year from the date of receipt by the original purchaser. This warranty covers defects in manufacturing or materials, but does not apply to batteries and battery covers. This warranty does not cover misuse or abuse of the alarm. Warranty service is provided directly by the Bedwetting Store. The briefs have a 6 month warranty.
Over time, residue may build up on the sensor contacts inside your brief and reduce the ability to quickly detect moisture or cause it to stop sounding. This may be due to your water, detergent or urine - or a combination of these factors. The same issue occurs with most other alarms, too. You simply need to soak the sensor briefs in vinegar or OxyClean solution to restore their sensitivity. Follow the steps below:
Sign up to get the latest on sales, new releases and more …
Be the first to hear about sales, promotions and more!