Standard Flat Sensor for Malem Alarms

J-MSST

    • Positioning: Simply cut slit in disposable pad or pants and insert moisture sensor
    • Pairs with: All Malem alarms except for the Malem Wireless Bedwetting Alarm
    • Details: Best Malem sensor to use with disposable pants or pads

    Malem alarms have a convenient modular plug (just like your telephone connector) to allow you to change sensors. This sensor will fit any Malem alarm, excluding the Malem Wireless Bedwetting Alarm. Please notify us when your purchase your Malem alarm if you would like this sensor instead of the Easy-Clip sensor.

  • The "Flat" sensor is a small, detachable, moisture-sensitive sensor. This rust-proof, gold plated sensor is easily cleaned and can replace any other Malem sensor. When urination commences and the sensor is moistened, the alarm is triggered.

    Malem alarms have a convenient modular plug (just like your telephone connector) to allow you to change sensors. Sensor will fit any Malem alarm except for the Malem Wireless Bedwetting alarm. Please notify us when you purchase your Malem alarm if you would like this sensor instead of the Easy-Clip sensor.

    Boys: This sensor slips inside the Y-fold/pouch of boy's briefs and clips in place with a crocodile clip or can be slipped into a disposable pant.

    Girls: The sensor can either be placed and anchored using the crocodile clip inside an absorbent, disposable pad worn inside the underwear, or sandwiched and anchored between two pairs of close fitting panties.


    Manufacturer Malem Medical
    Sensor Warranty 90 days
    Color Red and purple (Color may vary from picture)
    Sensor Dimensions Cord - 30" long, Flat Sensor - 1.5" x 0.75" x 0.2"
    Shipping Weight 2 ounces (View shipping rates and policies)
    Care Instructions Wash sensor with soap and water regularly.
  • MANUFACTURER Malem Medical
    MANUFACTURER ITEM CODE MSST
    ALARM TYPE Wearable

    The "Flat" sensor is a small, detachable, moisture-sensitive sensor. This rust-proof, gold plated sensor is easily cleaned and can replace any other Malem sensor. When urination commences and the sensor is moistened, the alarm is triggered.

    Malem alarms have a convenient modular plug (just like your telephone connector) to allow you to change sensors. Sensor will fit any Malem alarm except for the Malem Wireless Bedwetting alarm. Please notify us when you purchase your Malem alarm if you would like this sensor instead of the Easy-Clip sensor.

    Boys: This sensor slips inside the Y-fold/pouch of boy's briefs and clips in place with a crocodile clip or can be slipped into a disposable pant.

    Girls: The sensor can either be placed and anchored using the crocodile clip inside an absorbent, disposable pad worn inside the underwear, or sandwiched and anchored between two pairs of close fitting panties.

    Wash sensor with soap and water regularly.


  • Customer Reviews

    Based on 7 reviews
    57%
    (4)
    29%
    (2)
    0%
    (0)
    0%
    (0)
    14%
    (1)
    M
    M.
    Most reliable sensor we've tried

    We have tried at least three different brands of alarms and Malams has been the best overall. For Malams, the biggest challenge was to clean the standard sensor - urine cumulates inside the standard sensor and it then prevented the sensor from working again and it was impossible to clean properly. Finally, Malams came out with this flat sensor - it could be easily cleaned under hot water and reuse again and again. Although I still wish Malams to improve the clip - remove the clip cover (hard to clean and use) and reshape the clip itself to more ""skin friendly"", i.e. not so sharp to scratch skin.

    l
    l.
    Very disappointed

    I didn't get what i thought i was buying I got just a wire and i though i was getting what was pictured

    E
    E.P.
    Much better than original sensor

    The disciption says to use this with pull-ups. We use it with regular underwear. Just tuck the sensor I between the ""pee pocket"" of my son's underwear and it clips on with a little alligator clip. We did detach and move the alligator clip closer to the sensor head to achieve a nice snug fit in the pocket. It's so sensitive that the moisture from my hands sets it off so don't put it right next to your child's skin (especially if they are sweaty sleepers like mine). Awesome. We use this as our regular sensor and keep the original as a back up. LOVE it!

    N
    N.n.
    Good with diapers

    The sensor works with diaper in contrast to other sensors, so you do not need to protect the bed or to replace wet linen. Very sensitive sensor, only one drop of urine is needed to activate the alarm.

    D
    D.
    Works as advertised

    Tried it for stool, worked OK.

  • Customer Reviews

    Based on 7 reviews
    57%
    (4)
    29%
    (2)
    0%
    (0)
    0%
    (0)
    14%
    (1)
    M
    M.
    Most reliable sensor we've tried

    We have tried at least three different brands of alarms and Malams has been the best overall. For Malams, the biggest challenge was to clean the standard sensor - urine cumulates inside the standard sensor and it then prevented the sensor from working again and it was impossible to clean properly. Finally, Malams came out with this flat sensor - it could be easily cleaned under hot water and reuse again and again. Although I still wish Malams to improve the clip - remove the clip cover (hard to clean and use) and reshape the clip itself to more ""skin friendly"", i.e. not so sharp to scratch skin.

    l
    l.
    Very disappointed

    I didn't get what i thought i was buying I got just a wire and i though i was getting what was pictured

    E
    E.P.
    Much better than original sensor

    The disciption says to use this with pull-ups. We use it with regular underwear. Just tuck the sensor I between the ""pee pocket"" of my son's underwear and it clips on with a little alligator clip. We did detach and move the alligator clip closer to the sensor head to achieve a nice snug fit in the pocket. It's so sensitive that the moisture from my hands sets it off so don't put it right next to your child's skin (especially if they are sweaty sleepers like mine). Awesome. We use this as our regular sensor and keep the original as a back up. LOVE it!

    N
    N.n.
    Good with diapers

    The sensor works with diaper in contrast to other sensors, so you do not need to protect the bed or to replace wet linen. Very sensitive sensor, only one drop of urine is needed to activate the alarm.

    D
    D.
    Works as advertised

    Tried it for stool, worked OK.

Subscribe

x

x